Samsung HT-Z510 - XM Radio Features; XM Display Mode Cycling; Checking XM Signal Strength; Checking Radio ID for XM

XM Display Modes
TheXM featuresdescribed hereonlyoperate when theoptional XMreceiverand antennaare connected to
the mainunit.
Pressthe XM DISPLAYbutton.
,, Eachtime the XMDISPLAYbutton is pressed,the mode
changesas follows:
CHANNEL NAME/NUMBER "-* CHANNEL CATEGORY "-*
ARTIST NAME/SONG TITLE -" SIGNAL STRENGTH
,, Whenthe ChannelName/Numberis displayed:
,, Whenthe ChannelCategory is displayed :
,, WhentheArtist Name/SongTitle is displayed :
,, Whenthe SignalStrength is displayed :
(_ '_ The front panel display can indicate up to 10 alphanumeric characters at once. If the
information contains more than 10 characters, the information scrolls from right to left.
'_ If the information contains a character that cannot be recognized by the unit, the character
will be displayed with an underbar .....
Checking the XM Signal Strength
Pressthe XM DISPLAYbutton until<Signal> isdisplayed.
,, The displaychanges as shown belowaccordingto the receiving
condition.
Display Condition
GOOD Signalstrengthisgood
MARGINAL Signal strength is marginal
WEAK Signal strength is poor
NO Loss of signal
Checking the Radio ID
Pressthe Cursor 41,_.button (or 144,_,_1button on the main unit)
to selectchannel <o>.
,, The RadioIDis displayed.
(_ _ To sign up for an account with the XM Satellite Radio service, an XM Satellite Radio ID
number is required. Follow the procedure above to check your ID number, and then
access the website at http//activate.xmradio.com" or call "1-800-XM-RADIO(1-800-967-
2346)" with a major credit card to sign up.
67