Samsung HT-Z510 - Playback and Speaker Configuration; DVD Playback Mode Selection; DivX (R) Registration Information; Setting Speaker Mode Configuration

DVD PLAYBACK MODE
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit
to DVD-Video mode.
1. Press the MENU button while the disc tray isopen.
2. Press the Cursor T button to move to Setup and then press the
ENTER button.
3. Press the Cursor T button to move to DVD TYPE and then press
the ENTER button.
4. Press the Cursor A,T button to move to DVD VIDEO and then
press the ENTER button.
• Setsteps1 ~ 4againifyouwantto switchto DVDAUDIOPlaymode.
,, DVD VIDEO : Set to play the DVDvideo contents contained on
a DVD audio disc.
,, DVD AUDIO : Set to play the default DVDaudio.
(_ _ DVDPlay mode is set to DVDAudio as factory default setting.
_ Powering off the main unit will automatically switch to the DVD Audio mode.
DvIX (R) Registration
Please usethe Registration code to register this playerwith the DivX(R)video on demand format.
To learn more, go to vcc_v.divx.com/vod.
SETTING THE SPEAKER MODE
Signal outputs and frequency responses from the speakers will automatically be adjusted according to
your speaker configuration and whether certain speakers are used or not.
1. In Stop mode, press the MENU button.
2. Press the Cursor T button to move to Audio and then press the
ENTER button.
3. In the SPEAKER SETUP, press the ENTER button again.
4. Press the Cursor A,V,._,I_ button to move to the desired speaker
and then press the ENTER button.
• ForC,SL,andSR,eachtimethebuttonispressed,themodeswitches
alternatelyasfollows:SMALL-* NONE.
• ForL andR,themodeissetto SMALL.
,, SMALL : Select this when using the speakers.
,, NONE : Select this when no speaker is connected.
>_- Pressthe RETURN button to return to the previous level.
>_- Pressthe EXIT button to exit the setup screen.
(_ Depending on PROLOGICand STEREOsettings, the speakermode may vary(seepage61).
56