4
PLAYING MEDIA FILES USING THE USB HOST FEATURE
You can enjoymediafilessuch as pictures,movies and musicsavedon an MP3 player (exceptiPod),USB memorystick
or digitalcamerain highqualityvideowith 5.1 channel HomeTheater sound by connecting the storagedeviceto the
USB port of the Home Theater.
t. Connect the USB device to the USB port on the front
of the unit.
2. Press the FUNCTION button on the DVD Playeror the
PORT button on the remote control to select the USB
mode.
,, USB appears on the display screen and then
disappears.
,, The USB MENU screen appears on the TV screen
and the saved file is played.
3. To stop playback, press the STOP (D) button.
Safe USB Removal
To prevent damage to the memory stored in the USB device,
perform safe removal before disconnecting the USB cable.
,, Press the STOP (1"!) button twice in a row.
The display will show REMOVE USB.
,, Remove the USB cable.
[_ '_ To listen to your music files with 5.1 channel home theater sound, you must set the Dolby
Pro Logic II mode to Matrix. (See page 61)
_ In USB mode, you are not enabled to change the resolution or use the SETUP menu ifthere is
no USB device connected to the USB port.
Skip Forward/Back
During playback, press the I_,_,_1 button.
,, When there is more than one file and you press the _,_1
button, the next file isselected.
,, When there is more than one file and you press the I._
button, the previous file isselected.
5O