troLAbeshootnG
Refertothechartbelowwhenthisunitdoesnotfunctionproperly.Ifthe problemyouareexperiencingisnotlisted
belowor if theinstructionbelowdoesnot help,turn offthe unit,disconnectthe powercord,andcontactthe nearest
authorizeddealerorSamsungElectronicsServiceCenter.
Disc tray does not open.
'Please connect your ipod'
appears on the screen,
Playback does not start
immediately when the
Play/Pause button is pressed,
Sound is not produced.
Sound can be heard only from a
few speakers and not all six.
Dolby Digital 5,1 CH Surround
Sound is not produced,
The remote control does not
work.
• Is the power cord plugged securely into the outlet?
Turn off the power and then turn it back on.
Remove the iPod from the docking cradle and reinsertagain.
Ifthe battery levelof your iPod is totally drained, you
haveto charge it again before use.
Are you usinga deformed disc or a disc with scratches on
the surface?
* Wipe the disc clean.
No sound is heard during fast playback, slow playback, and
step motion playback.
Are the speakers connected properly? Isthe speaker setup
correctly customized?
Is the disc severely damaged?
* When listeningto a CD or radio, sound is output to the front
speakers (L/R)only. Select "PRO LOGIC I1"by pressing
I][qPL II(Dolby Pro Logic II)on the remote control to use all
six speakers.
* Make sure that the DVDdisc is 5.1-CH compatible.
* Ifyou set C, SL, and SR to NONE inthe speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and rightspeakers. Set C,
SL, and SR to SMALL.
* Is there "Dolby Digital5.1 CH" mark on the disc? Dolby
Digital 5.1 CH Surround Sound is produced only if the disc is
recorded with 5.1 channel sound.
Is the audio language correctly set to DOLBY DIGITAL
5.1-CH in the information display?
Is the remote control being operated within its operation
range of angle and distance?
Are the batteriesexhausted?
Have you selected the mode(TV/DVD)functions of the
remote control (TVor DVD)correctly?
70
To Next Page
Loading...
