28 English
Operation
Using the Sound Modes
3D SOUND
Press the 3D SOUND button.
• Each time you press this button, 3D SOUND ON 3D SOUND OFF will be selected in turn.
• You can also select the 3D SOUND mode by pressing the 3D SOUND button on the remote
control.
✎ NOTE
The 3D sound effect will not be available for FM.
The 3D sound effect will not be available for simple mode when simple setup is set.
DSP (Digital Signal Processor)/EQ
Press the DSP/EQ button.
• Each time you press this button, POPS JAZZ ROCK
USER STUDIO
CLUB HALL MOVIE CHURCH GAME CONCERT STADIUM OFF will be
selected in turn.
• You can also select the DSP/EQ mode by pressing the DSP/EQ button on the remote control.
✎ NOTE
The menu may vary depending on the region.
The DSP/EQ function is only available in Stereo mode.
The DSP/EQ function is not available while playing AC3 signal in 2.1 channel mode.
Dolby Pro Logic II Mode
Press the PL II button.
• Each time you press this button, STEREO MUSIC MOVIE PROLOGIC MATRIX will
be selected in turn.
✎ NOTE
You cannot use Dolby Pro Logic ll mode for Analog multi channel signals.
Pro Logic works with the audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.
Before selecting Dolby Pro Logic II mode, connect your external device to the AUDIO INPUT jacks
(L and R) on the product. If you connect to only one of the inputs (L or R), you cannot listen to surround
sound.
The Pro Logic II function is only available in Stereo mode.
The Pro Logic II function is not available while playing AC3 signal in 2.1 channel mode.
Operation
To Next Page
Loading...
