14
Setting Options
English
Setting Options
Step 1 Step 2 Step 3 Step 4 Step 5 Description Default
User Mode
Wired
remote
controller
LED ON/OFF ON
Button Mute ON/OFF OFF
Current Time
Date
Date Format
YYYY/MM/DD,
DD/MM/YYYY,
MM/DD/YYYY
DD/MM/YYYY
Year/Month/
Day
2000 to 2099/1 to
12/1 to 31
2019.01.01
Time
Time Format 12-Hour/24-hour 12-Hour
Hour/
Minute/
AM/PM
0 to 12/0 to
60/AM.PM
PM 12 Hour 00
Minute
Reset
Remote
Controller
--
Display
Setting
Brightness 10 to 100% 100%
Screen Saver
Timer 10 to 60 seconds 30sec
Brightness 0, 10, 30, 50, 70% 30%
Smart Reset - -
Reset All
User modes
--
Service Time
Check
Service Call
Number
Service call number
entered for Service
mode
-
Last
Inspection
Final control date
entered for Service
mode
-
NOTE
࡙ When two wired remote controllers are connected, the brightness can be set within 10 to 50%.
࡙ If the screen is on stand by for an hour, in order to protect the screen it converts to screen protection
mode for a minute before returning to the normal screen.
If the buttons are pressed after the screen protection is displayed it converts to the stand by screen right
away.
To Next Page
Loading...
