17
English
Installation/Service mode
Installation/Service mode
NOTE
࡙ Unavailable functions are marked inactive and they cannot be set.
࡙ If communication initialization is needed after the setting, the system will reset automatically and
communication will be initialized.
Step 1 Step 2 Step 3 Description Default
Service Timer
Service Call
Number
16-digit phone number
Input: Blank, -, 0-9
-
Last Inspection Year, Month, Day -
Installation Data Year, Month, Day -
Quiet Mode
Automatic Time
Enable/Disable Disable
Entry time to Exit time PM 10:00 ~ AM 06:00
Indoor Zone
Option
Cool/Heat
Selection
Cool & Heat/Heat only Cool & Heat
Main/Sub Wired
Remote
Main/Sub Main
Zone Selection Zone 1/Zone 2 Zone 1
Standard
Temperature
Water Outlet/Indoor Water Outlet
Temperature Unit
Celsius(°C):
ߢঐࢥߡࢋߦঐࢥߡࢋߢঐ
ߡࢋߦঐ
Temperature
Sensor Selection
Wired Remote
Controller/External
Temperature Sensor
Wired Remote
Controller
Room
Temperature
Calibration
Reference
Temperature
-9 to 40°C -
Calibration Value -9.9 to 9.9°C 0°C
To Next Page
Loading...
