53
English
Appendix
<Emergency hot water supply_(when using FSV #3011, 3031)>
࡙ Hot water is supplied only by the booster heater if the outdoor unit malfunctions.
࡙ Enabling the function : Turn off the Control kit Dip S/W #2, and then turn the power off and on.
࡙ Disabling the function : Turn on the Control kit Dip S/W #2, and then turn the power off and on.
࡙ Default operation : Automatic hot water supply is performed at a set temperature of 50°C.
To Next Page
Loading...
