Installation/Service mode
18
Installation/Service mode
Installation/Service mode
NOTE
• Unavailable functions are marked inactive and they cannot be set.
• If communication initialization is needed after the setting, the system will reset automatically and
communication will be initialized.
Step 1 Step 2 Step 3 Description Default
Service information
Service company
Enter service
provider’s name
Call number
Entering a phone
number
E-mail
Entering an email
address
Last service date Enter service date
Installation date Enter installation date
Heat pump options
Zone control and
heating type (4061)
Note1)
Zone 1 heating type
Zone 1 Floor / FCU /
Radiator
Floor
Zone 2 (4061) heating
type
Zone 2 Floor / FCU /
Radiator
Floor
Heat pump controller
temperature settings
Note2)
Controller installed
in heat pump /
Controller installed
indoors
Heat pump
Water pump settings
Inverter pump control
(4051)
Not used / Max 100%
/ Max 85% / Max 70%
100%
Inverter pump
minimum control
(4054)
25% / 35% / 45% /
55%
25%
Zone 1 pump
control(Thermo off)
(4062)
Off
/
On
/
Off
and
On Off
and
On
Zone 2 pump
control(Thermo off)
(4063)
Off
/
On
/
Off
and
On Off
and
On
Mixing valve (4041,
4042, 4043)
Used / Not used Used / Not used
(*1)
Used selected
Target temperature/
Water Law
temperature
Target temperature/
Water Law
temperature
(*1)
(4042)
(4043)
DB68-12922A-02_IB_24Y EHS AE7000D_EU_EN_.indd 18DB68-12922A-02_IB_24Y EHS AE7000D_EU_EN_.indd 18 2024-12-11 오전 10:04:392024-12-11 오전 10:04:39
To Next Page
Loading...
