25
Field Setting Mode
AI Home Setting Range: Code 10**
Space Cooling (FSV#1011~1022)
•
– With this default FSV settings, user can change the target water outlet temperature within the range of
– Do not set it below 16 degrees to prevent floor condensation when using underfloor cooling.
•
– With this default FSV settings, user can change the target room temperature within the range of
Space Heating (FSV#1031~1042)
•
– With this default FSV settings, user can change the target water outlet temperature within the range of
•
– With this default FSV settings, user can change the target room temperature within the range of
DHW Heating (FSV#1051/1052)
•
– With this default FSV settings, user can change the target tank temperature within the range of
Hysteresis (FSV#1061~1064)
If the value of the FSV is large, it takes longer to thermo on
• Water outlet temperature control by hysteresis (heating)
• Water outlet temperature control by hysteresis (cooling)
• Room temperature control by hysteresis (heating)
• Room temperature control by hysteresis (cooling)
DB68-12922A-02_IB_24Y EHS AE7000D_EU_EN_.indd 25DB68-12922A-02_IB_24Y EHS AE7000D_EU_EN_.indd 25 2024-12-11 오전 10:04:402024-12-11 오전 10:04:40
To Next Page
Loading...
