Samsung MIM-E03FN - Page 34

Field setting mode
34
English
Field Setting Mode
<Example of using BSH in hot water supply>




(Thermo off / on operation temperature is used together)
[Thermo on/off control of Heat pump and Booster Heater]
t
HP BH
HP
T
BH OFF
T
HP MAX
T
HP OFF
T
HP ON
T
BH ON
T
U
ON
ON
OFF
OFF
MAX
t
Thp
Thp
HP & BH
OFF
ON
#3033
2℃
#3022
#3023
Case 1 : When set temperature(Tu) > ThpMAX(FSV #3021)
1)*
Case 2 : When set temperature(Tu) ≤ ThpMAX(FSV #3021)
1)*
NOTE
•
1)*
The value is determined according to the type of outdoor unit.
• "Power/Forced/Standard" DHW mode operation without booster heater installed, DHW mode operates as a
heat pump only. However, when setting FSV#6051, it is possible to replace it with a backup heater.
DB68-12922A-02_IB_24Y EHS AE7000D_EU_EN_.indd 34DB68-12922A-02_IB_24Y EHS AE7000D_EU_EN_.indd 34 2024-12-11 오전 10:04:412024-12-11 오전 10:04:41