1. If the recording paper is
jammed in front of or inside the fuser.
(Perform DCU diagnostic
code 08)
2. If the recording
paper is stuck in the discharge
roller and the fuser just after passing
through the Actuator-Feed, Feed
Actuator may be
defective.
Replace the SMPS.
Reassemble the Actuator-Feed
and Spring-Actuator if the returning
is bad.
• Description 1. Recording paper is jammed in front of or inside the fuser.
2. Recording paper is stuck in the discharge roller and in the fuser just after passing through the
Actuator-Feed.
To Next Page
Loading...
