Service Manual
Alignment & Troubleshooting
4-39
Samsung Electronics
3) Abnormal Printing
• Description
The printing is not working properly even when the cable has no problem.
(even after the cable is replaced)
If the printer won't work at all or the strange fonts are repeated, the printer driver may be
defective or wrong setup in the CMOS Setup.
1. Set up the parallel port in
the CMOS SETUP.
2. Printer Driver Error.
3. Error message from
insufficient memory. (The printing
job sometimes stops or due to insufficient
virtual memory, but it actually comes
from the insufficient space of
the hard disk.)
Select SPP(Normal) or ECP LPT Port the among
ECP, EPP or SPP in the CMOS Setup.
Check the printer in My Computer.(to see if the
printer driver is compatible to the present driver
or delete the old driver, if defective and reinstall
the new driver)
Delete the unnecessary files to secure enough
space of the hard disk and start printing job again.
To Next Page
Loading...
