Samsung NX1 - Saving Selection AF Position; Multi AF

102
Shooting Functions > AF area
Saving Selection AF position
You can set the camera to remember the most recent AF position used by
Selection AF and Touch AF before turning the camera o.
To set this function,
In Shooting mode, press [m] ĺ b ĺ Save Selection
AF Position
ĺ an option.
Multi AF
The camera displays a green rectangle in places where focus is set
correctly. The photo is divided into two or more areas, and the camera
obtains focus points of each area. This mode is recommended for taking
photos of scenery.
When you press [Shutter] halfway, the camera displays the focus areas as
shown in the photo below.