Samsung NX1 - Connecting the External Flash

My Camera > Accessories
65
3
Rotate the hot-shoe fastening dial as shown in the illustration
to lock the ash into place.
4
Slide the power switch towards ON to turn on the ash.
• You can capture a photo with a ash that is not fully charged, but it is
recommended to use a fully charged ash.
• The available options may dier depending on the shooting mode.
• There is an interval between two bursts of the ash. Do not move until the
ash res a second time.
• For more details about optional ashes, refer to the user manual for the ash.
Use only Samsung-approved ashes. Using incompatible ashes may damage
your camera.
Connecting the external ash
1
Remove the hot-shoe cover from the camera.
2
Mount the ash by sliding it into the hot-shoe.