Samsung NX1 - MIC Level; Smart Range; Time Code (HDMI)

137
Shooting Functions > Video functions
Mic Level
Set the mic level for the shooting conditions.
To set the mic
level,
In Shooting mode, press [m] ĺ g ĺ Mic Level ĺ rotate
the navigation button or press [e/e] to adjust the mic level
ĺ
touch Set.
Smart Range+
Correct for the loss of bright detail.
To set Smart
Range+ options,
In Shooting mode, press [m] ĺ g ĺ Smart Range+ ĺ
an option.
Time Code (HDMI)
Time Code refers to a unique number assigned to each frame of a video
le. It is useful for editing because the number is given for each frame
and enables the synchronization with other device that outputs dierent
formats. This functions allows the camera to send the time code to an
external recorder* when they are connected via an HDMI cable. If a video is
saved on the camera's memory card, the time code will not be recorded.
* External recorders that support Atomos Protocol v2.0 are currently supported and more
recorders will be available soon.
To set Time Code
options,
In Shooting mode, press [m] ĺ g ĺ Time Code (HDMI)
ĺ an option.
* Default
Option Description
Time Code
Set to display or hide the time code.
• O*: Do not display the time code.
• On: Display the time code.
Time Notation
Set the hour, minute, second, and frame manually or
set the time code to the camera’s time.
• Manual Settings: Set the hour, minute, second, or
frame number of the time code manually.
• Camera Time*: Display the time code in the format
of the time (hour, minute, second) set on the
camera.
Time Code Mode
Set to automatically adjust the gap between the
recording time of the camera and the time code or
make no change.
• Drop Frame*: Automatically adjusts the gap
between the recording time of the camera and the
time code. This function is generally used when
the accurate running time of a video, such as a TV
program, is required.
• Non-Drop Frame: Do not adjust the gap between
the recording time of the camera and the time code.