Samsung NX1 - Flash Settings; Setting External Flash

119
Shooting Functions > Flash
Flash settings
Set the ash mode, exposure value, ash brightness, or multi ash when
you attach an external ash to the camera. You can also set wireless sync to
control the internal or external ash. The ash settings are supported only
when you attach a compatible, optional external ash (SEF-580A).
Setting external ash
To set external
ash,
In Shooting mode, press [m] ĺ b ĺ External Flash
Settings
ĺ an option.
Option Description
Flash Mode
• A-TTL: In the A-TTL (Advanced Through The Lens) mode,
the camera measures the light reected by the subject
through the lens. Then, it calculates the optimum
exposure based on the exposure value and shutter
speed.
• Manual Flash: The ash emits the full amount of light or
the ash intensity can be adjusted manually.
• Multi Flash: When you press [Shutter], the ash res
multiple times based on the number you have set.
Flash EV
Set the exposure of the ash when the ash mode is
A-TTL.
Flash Output
Set the brightness of the ash when the ash mode is
Manual Flash.
Multi Flash
Settings
Set the count, brightness, or frequency of the ash when
the ash mode is Multi Flash.
If data can be exchanged between the camera and the ash, the settings for the
external ash can be adjusted on the camera or the ash. Your previous options
will be applied.