Samsung NX1 - Connecting to a Computer; Using Auto Backup for Photos or Videos; Installing the Program for Auto Backup on Your PC; Using the Auto Backup Feature

176
Connecting & Transferring
Connecting to a computer
Using Auto Backup for photos or videos
You can send photos or videos that you captured with the camera to a PC
wirelessly.
Installing the program for Auto Backup on your PC
1
In Shooting or Playback mode, press [m] ĺ q ĺ USB
Connection
ĺ Mass Storage. (p. 194)
2
Connect the camera to the PC with the USB cable.
3
Turn on the i-Launcher program, and then select PC Auto
Backup.
• The Auto Backup program is installed on the PC. Follow the on-
screen instructions to complete the installation.
4
Remove the USB cable.
Before installing the program, ensure that the PC is connected to a network.
Using the Auto Backup feature
1
In Playback mode, select a le, and then touch ĺ .
• In thumbnail view, you cannot use the Auto Backup feature.
• If the pop-up message that prompts you to download the
application appears, select Next.
• The camera will automatically attempt to connect to a WLAN via
the most recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will
search for available AP devices. (p. 163)
2
Select a backup PC.