Samsung NX1 - Setting Network Options; Manually Setting the IP Address

164
Connecting & Transferring > Sending photos via email
• When a login page appears, refer to “Using the login browser“.
(p. 165)
• When you select an unsecured AP, the camera will connect to the
WLAN.
• If you select a WPS prole supported AP, select ĺ WPS PIN
connection, and then enter a PIN on the AP device. You can also
connect to a WPS prole supported AP by selecting
ĺ WPS
button connection on the camera, and then pushing the WPS
button on the AP device.
• The same AP may be listed twice, with dierent frequencies,
because your camera supports the dual band function.
Setting network options
1
In the Wi-Fi Setting screen, move to an AP, and then press [e]
(right) or touch
.
2
Select each option, and then enter the required information.
Option Description
Network Password
Enter the network password.
IP Setting
Set the IP address automatically or manually.
Manually setting the IP address
1
In the Wi-Fi Setting screen, move to an AP, and then press [e]
(right) or touch
.
2
Select IP Setting ĺ Manual.
3
Select each option, and then enter the required information.
Option Description
IP
Enter the static IP address.
Subnet Mask
Enter the subnet mask.
Gateway
Enter the gateway.
DNS Server
Enter the DNS address.