Samsung NX300 - 3 Disassembly and Reassembly; Disassembly

Copyright ⓒ since 1995 Samsung Electronics. All rights reserved. 3-1
Disassembly and Reassembly
Repair Service Part Items to be adjusted Required equipment
General support
LCD, Back-Cover, Top - -
Technical expertise
support
LENS Mount, Front-Cover CMOS Tilt
CMOS-Tilt equipment
Shutter speed equipment
Light box (5500K)
Light box (3200K)
ASSY-CMOS
CMOS Tilt, AWB etc. (Light box)
Shutter Shutter Speed
MAIN PBA
AWB etc. (Light box)
<Table 3-1>
Fig. 3-1
3-1-1 General support - Disassembly
SCREW MACHINE
6001-002152
SCREW MACHINE
6001-002159
1. We provide the general support.
: Samsung Authorized Service Center will provide courteous service on Samsung products
for which they are authorized.
2. We provide the technical expertise support.
: After replacing the parts such as Main PBA, CMOS, Shutter, Mount, it is required to adjust these parts
with the equipment specied below.
For more detail information, refer to chapter 8 Adjustment.
3. Disassembly and reassembly
3-1 Disassembly
1. Remove the 1 screw on the left side, 2 screws on the right side and 5 screws on the bottom side.