Samsung NX300 - Firmware Update by Using User Menu

Firmware update
7-4 Copyright ⓒ since 1995 Samsung Electronics. All rights reserved.
7-2 Firmware update by using user menu
■
This section describes how to update the latest version of rmware for camera body.
Fig. 7-6
CAUTION
!
■ Make sure the battery is fully charged. Or use the AC adaptor.
■ Since all the les stored in the internal memory will be deleted, ensure that important les are copied to other storage device.
2. Power on the camera.
4. Select the Body Firmware.
3. Press Menu -> Go to Settings -> Select Device Information -> Select Firmware Update.
nx300.bin
1. Copy the latest rmware le such as nx300.bin into the root directory of the SD Card. Insert the SD Card into the camera.
Back
MENU
Firmware Update
Lens Firmware
Body Firmware
Device Information