Samsung NX300 - Firmware Update by Using CS Menu

Firmware update
7-6 Copyright ⓒ since 1995 Samsung Electronics. All rights reserved.
7-3 Firmware update by using CS menu
■
This section describes how to update the latest version of rmware for camera body.
Fig. 7-9
CAUTION
!
■ Make sure the battery is fully charged. Or use the AC adaptor.
■ Since all the les stored in the internal memory will be deleted, ensure that important les are copied to other storage device.
2. Power on the camera.
1. Copy the nx_dev.adj le into the root directory of the SD Card. Insert the SD Card into the camera.
3. Select the Smart Auto Mode.
Mode dial