Samsung NX300 - Page 66

Copyright ⓒ since 1995 Samsung Electronics. All rights reserved. 7-7
Firmware update
Fig. 7-10
Fig. 7-11
Cancel
MENU
1. FW UPDATE
(1) BODY FW UPDATE
(2) LENS FW UPDATE
(3) DSP FW BACKUP
(4) RESET USERDATA
4. Press the following buttons as shown below.
(1) Down -> (2) OK -> (3) Up -> (4) OK -> (5) Right -> (6) Press and hold the EV button and then press OK button.
(3)
(5)
(1)
(2),(4)
(6) Press and hold the EV button and then press OK button.
5. Select FW UPDATE-> Select BODY FW UPDATE.