4-2
Copyright
ⓒ
since 1995 Samsung Electronics. All rights reserved.
4-2 Regarding to MAIN PCB connection
Symptom Explanation/Solution Note
1. Power does not work.
1. Check the connection between
MAIN PCB and TOP PCB.
2.
Check the connection of
TILT FPCB.
(It may be LED problem. Double check if LED
is not blinking.)
2.
LCD displays black.
1.
Check the connection of
CIS FPCB.
2.
Check the connection of
SHUTTER FPCB.
3.
Check the connection of
TILT FPCB.
3. KEY button on the rear side does
not work.
(MENU, Fn, recording,
playback, delete,
4-way direction button)
Check the connection of
TILT FPCB.
4. LENS is not being recognized.
(It displays saying
"Les is not attached.")
Check the connection of
WIRE HARNESS
on DRS PCB.
5.
It does not display "F#"
correctly on the bottom
of LCD screen.
(Instead it displays "F--"
on the bottom of LCD screen.)
Check the connection of
LENS FPCB
on MAIN PCB.
To Next Page
Loading...
