Samsung NX300 - Adjustment Data Image Storage

Adjustment
8-18 Copyright ⓒ since 1995 Samsung Electronics. All rights reserved.
8-13 Adjustment data Image Storage
■ After the adjustment is completed, The adjustment value in the boot image is the process of storing.
■ After adjustment progressIf you do not proceed with this process, the boot might be slower.
1. Copy the below two script les to memory card and insert the memory card into the camera.
2. When you turn on the power Adjustment data is stored in the Boot Image It takes about 3 minutes.
info.tg
nx300_snap.adj
4. After installing, PC shows pop-up message.
Fig. 8-30
7
8
Click
Click