<How to adjust>
1. Copy the script le to SD card and insert the SD card into the camera.
2. Attach the camera with master lens to the 5500K Light Box as illustrated in the image below.
3. When turning on the camera, the process will proceed automatically.
Fig. 8-19
8-8 Color Shading Adjustment
■ This section describes how to adjust the brightness gap between center and around.
LIGHT BOX (5500K, LV12), 30mm Lens LIGHT BOX (5500K, LV12), 30mm Lens
Required equipmentofRequired equipmentof
info.tg
nx300_shading.adj
<Set up a camera in front of the Light box>
Light source Box
Camera
To Next Page
Loading...
