Samsung NX300 - 7 Firmware Update; Factory Data Reset

Copyright ⓒ since 1995 Samsung Electronics. All rights reserved. 7-1
Firmware update
7-1 Factory data reset
1. Copy les such as nx_cs.adj & nx_dev.adj into the root directory of the SD Card. Insert the SD Card into the camera.
3. Select the Smart Auto Mode.
2. Power on the camera.
■
This section describes how to reset the factory data.
7. Firmware update
Fig. 7-1
Fig. 7-2
Mode dial
nx_cs.adj
nx_dev.adj