Samsung NX300 - Page 61

Firmware update
7-2 Copyright ⓒ since 1995 Samsung Electronics. All rights reserved.
5. After selecting the SYSTEM PARAMETER, press the OK button.
Fig. 7-3
Fig. 7-4
(2)
(1)
Cancel
MENU
1. FW UPDATE
2. SYSTEM PARAMETER
3. ADJUSTMENT CONTROL
4. LENS CONTROL
5. CARD CONTROL
4. Press the following buttons as shown below.
(1) Down -> (2) OK -> (3) Up -> (4) OK -> (5) Right -> (6) Press and hold the EV button and then press OK button.
(3)
(5)
(1)
(2),(4)
(6) Press and hold the EV button and then press OK button.