Samsung NX300 - Page 62

Copyright ⓒ since 1995 Samsung Electronics. All rights reserved. 7-3
Firmware update
6. Press the OK button to select the FACTORY RESET.
7. Power off the camera.
8. Power on the camera and check the initialization setting to insure that it is successfully initialized.
Fig. 7-5
(2)
(1)
OK button
Cancel
MENU
2. SYSTEM PARAMETER
(1) FACTORY RESET
(2) POWER OFF TEMP.
OFF
(3) DISABLE CHINESE LANG
(4) DISABLE DISPLAY SAVE
(5) DISABLE POWER SAVE
(3)
(5)
(1)
(2),(4)