8-4
Copyright
ⓒ
since 1995 Samsung Electronics. All rights reserved.
8-4 CIS DOT Data Input & SHUTTER Adjustment
■ It has stored DOT data in the EEPROM after replacing the main PCB or CMOS.
■ It is required to adjust the Shutter Speed for incorporating an EEPROM storing the default adjustment values after replacing
Shutter ASSY or Main PCB.
<How to Adjust>
1. Download the “CIS DOT_SHUTTER SPEED.ZIP” le to a directory on your PC and extract it.
1) Navigate to the directory you extracted to and double click the “2005vcredist_x86.exe”.
(A window will appear. After nishing installation the window will close.)
2) Extract the “NXCISTEMP_nx300.zip” file to the c:\ directory such as C:\NXCISTEMP_nx300.
Make sure to save “NXCISTEMP_nx300.zip” file to the above directory.
PC program will search the CIS dot data in the above specified directory.
2. Double click the “libusb-win32-filter-bin-1.1.14.3.exe” to execute.
(Please refer to on page 8-8 for installing module between the NX SET and PC communications(PTP). Follow the .)
3. Download the “nx300 SHUTTER 2.5.ZIP” file to a directory on your PC and extract it.
CIS DOT DATA le
Executable le for setting channel and PC software
Module between NX SET and PC communications (PTP)
PC Execution Environment
Fig. 8-3
Fig. 8-4
Extract
Cancel
Please wait while the Microsoft Visual C++ 2005
Redistributable.
300
Fig. 8-5
To Next Page
Loading...
