Samsung NX300 - ISO sensitivity

Copyright ⓒ since 1995 Samsung Electronics. All rights reserved. 3-5
Disassembly and Reassembly
Fig. 3-8
Fig. 3-9
8. Remove the screw.
SCREW 1416 MACHINE
6001-003021
9. Insert the tweezers into the hole of screw as illustrated in Fig. 2 and open the LCD Panel.
10. Remove the FPCB as illustrated in Fig. 3.
Fig. 2
LCD Panel
Remove the FPCB.
Fig. 3
1. It is installed. 2. Remove.