Samsung NX300 - Page 41

Copyright ⓒ since 1995 Samsung Electronics. All rights reserved. 3-27
Disassembly and Reassembly
3-2-2 General support - Reassembly
Fig. 3-49
1. Install the following parts in the order indicated below.
① ASSY DIAL COMMAND
② ASSY PCB TOP
③ PLATE-HOT SHOE BOTTOM
③ PLATE-HOT SHOE BOTTOM
① ASSY DIAL COMMAND
② ASSY PCB TOP
Fig. 3-50
2. Tighten the 7 secrews.
3. Connect the FPCB as illustrated in Fig. A.
CAUTION
!
SCREW TAPTYPE
6003-001739
SCREW TAPTYPE
6003-001739
SCREW MACHINE
6001-001914
SCREW TAPTYPE
6003-001660
Connect the FPCB.
FPCB
FPCB
Fig. A
1. Connect.
2. It is installed.
Use extra care when connecting the FPCB to the connector.
as illustrated in