Samsung NX300 - Page 45

Copyright ⓒ since 1995 Samsung Electronics. All rights reserved. 3-31
Disassembly and Reassembly
Fig. 3-57
11. Install the ASSY PCB MAIN.
ASSY PCB MAIN
Fig. 3-58
12. Tighten the 3 screws.
13. Connect the 4 FPCBs as illustrated in Fig. F, Fig. G and Fig. H.
2. Close.1. Install.
③ Connect the FPCB to the connector.
FPCB
FPCB
Fig. F
2. Close.1. Insatll.
①, ② Connect the FPCB to the connector.
FPCB
FPCB
SCREW TAP
6003-001739
④ Connect the FPCB.
FPCB
FPCB
Fig. H
Fig. G
1. Install.
2. It is installed.
③
④
②
①
CAUTION
!
Use extra care when connecting the FPCB to the connector.