8-14
Copyright
ⓒ
since 1995 Samsung Electronics. All rights reserved.
<PAF equipment settings>
1. Connections.
2. USB to serial port setting.
1) After installing USB to serial cable driver, please connect cable to PC.
2) Please check COM port number in device manger.
3) Please revise and store port number in “Setup.ini” le.
3. Please execute “USBSet1.1.exe” le.
4. Please cut USB ID and move to Channel 5.
Fig. 8-24
Fig. 8-25
PAF equipment
Input COM PORT NUMBER
①
MOVE TO CHANNEL 5
②
CLICK
③
CLICK
To Next Page
Loading...
