2-1
Chapter 2 Installing Single and Multiple
Cabinet Configurations
Unpacking and Inspection
The OfficeServ500 can be configured in several ways: ‘S’ and ‘M’ systems are configured as a single
cabinet only; ‘L’ systems can have one, two or three cabinets.
A single cabinet system may be wall, floor, or rack mounted while multiple cabinets systems may only
be floor or rack mounted. Do not attempt to wall mount a multiple cabinet system.
All system cabinets are identical. When unpacking the cabinet(s), inspect for signs of physical damage.
If any damage is detected, do not attempt installation—contact your supplier instead.
Check to see that each cabinet carton includes the following items:
y Top cover
y Left and right side covers
y Front cover
y Cabinet leg mounting kit
y AC power and DC power cables
Check that all additional hardware and software is available for installation.
y Floor mounting equipment (legs or castors), if required.
y Cards required to make the system functional (i.e., power supply, central processor, station and
trunk cards).
To Next Page
Loading...
