Samsung POWERbot SR20K9350W Series User Manual (English)

Other manuals for Samsung POWERbot SR20K9350W Series

Questions and Answers:

A
Ashley WilliamsAug 22, 2025
What to do if my Samsung POWERbot Vacuum Cleaner is stopped during cleaning?
- T
  troycaseyAug 23, 2025
  Your POWERbot might stop during cleaning for a few reasons. It could be due to a low battery; if 'Lo' is displayed, carry the POWERbot to the docking station to charge it. Alternatively, the POWERbot might be stuck on an obstacle like a cord or threshold; pick it up and remove it from the obstacle. Lastly, fabrics or strings could be caught in the drive wheel; in this case, turn off the emergency switch and remove the obstructions before using it again.
M
matthewwallaceSep 1, 2025
What to do if the filter indicator stays on in my Samsung POWERbot SR20K9350W Vacuum Cleaner?
- J
  John PeckSep 1, 2025
  If the "Filter inspection indicator" remains on your Samsung POWERbot vacuum cleaner even after emptying the dustbin, turn off the emergency switch and then turn it back on. If that doesn't work, empty the dustbin again and thoroughly re-clean the filter.
L
Laura HillAug 31, 2025
Why can't my Samsung Vacuum Cleaner POWERbot find the docking station?
- L
  Laura LyonsAug 31, 2025
  If your Samsung POWERbot vacuum cleaner can't find the docking station, ensure there isn't a power failure and the power plug is properly connected. Remove any obstacles around the docking station that might be blocking the POWERbot. Also, clean any foreign matter from the charge pins.
L
Lisa CollinsAug 29, 2025
How to improve weak suction on a Samsung POWERbot SR20K9350W POWERbot?
- B
  Brittany LeeAug 30, 2025
  If your Samsung POWERbot vacuum cleaner's suction is weak, and the filter inspection indicator is on, turn off the emergency switch and clean the dustbin. If the dustbin is full, empty it. Check for blockages at the intake on the bottom of the POWERbot, and remove any obstructions. If the noise suddenly increases, turn off the emergency switch and empty the dustbin.
F
franciscotaylorAug 28, 2025
How to solve a connection cut between SmartThings App and Samsung POWERbot Vacuum Cleaner?
- B
  Benjamin Chaney DDSAug 28, 2025
  If a connection cut occurs, refresh the screen and wait. If that doesn't work, run the SmartThings App again. Also, check for any internet connection problems, especially if a firewall might be interrupting the operation.
K
Kenneth Prince MDAug 27, 2025
Why Samsung POWERbot Vacuum Cleaner cannot find the docking station?
- E
  Earl WilliamsAug 27, 2025
  The POWERbot may fail to locate the docking station due to a few reasons. Check for a power failure or if the power plug is unplugged. Also, ensure there are no obstacles around the docking station that could prevent the POWERbot from returning. Lastly, check the charge pins for any foreign matter and clean them off.
M
Morgan MitchellAug 27, 2025
Why is my Samsung POWERbot SR20K9350W Vacuum Cleaner POWERbot not working?
- D
  dawnturnerAug 27, 2025
  If your Samsung POWERbot vacuum cleaner is not working, first ensure the emergency switch is on. Check that all icons are displayed on the panel. If "Lo" is displayed, the battery is low; place the POWERbot on the docking station to charge. If the remote isn't working, replace its AAA batteries.
S
Sean PetersonAug 25, 2025
What to do if my Samsung POWERbot SR20K9350W Vacuum Cleaner POWERbot stops during cleaning?
- B
  blewisAug 26, 2025
  If your Samsung POWERbot vacuum cleaner stops during cleaning, and the display shows "Lo", move it to the docking station for charging. If it's stuck on something like a cord, carefully lift it off the obstacle. Also, if any fabric or strings are caught in the drive wheel, turn off the emergency switch and remove them before restarting.
A
Anthony BauerAug 25, 2025
How to fix Samsung POWERbot Vacuum Cleaner not working at all?
- E
  emily14Aug 25, 2025
  If your POWERbot isn't working, check if the emergency switch is on and ensure all icons are displayed on the panel. If 'Lo' is displayed, the battery is depleted, so place it on the docking station to charge. Also, if the remote isn't working, replace the batteries (AAA type).

Samsung POWERbot SR20K9350W Series Specifications

General

Model	SR20K9350W
Bagged/Bagless	Bagless
Dustbin Capacity	0.7 L
Suction Power	20 W
Battery Type	Lithium-ion
Battery Voltage	14.4 V
Wi-Fi Connectivity	Yes
App Compatibility	Samsung SmartThings
Remote Control	Yes
Auto Recharge	Yes
Noise Level	65 dB
Type	Robot
Battery Life/Operating Time	90 minutes
Charging Time	180 min
Width	345 mm
Depth	345 mm
Cleaning Modes	Auto, Spot
Voice Control	Yes
Navigation	Visionary Mapping Plus