Why I have installed the SmartThings App, but the Samsung POWERbot SR2AK9350W POWERbot fails to be connected?
To connect the POWERbot, ensure you connect the wireless router and the POWERbot through Easy-Setup, following the correct procedure.
Why location recognizing function does not operate on my Samsung POWERbot SR2AK9350W Vacuum Cleaner POWERbot?
To ensure proper location recognition, operate the POWERbot again near the area where it previously stopped. Note that if the POWERbot doesn't recognize the surrounding environment or starts cleaning more than 4 ft (1 m) from where it stopped, searching may be difficult.
Why I fail to log into the Samsung account for my Vacuum Cleaner POWERbot?
If you can't log into your Samsung account, double-check your ID and password on the screen.
Why controlling with SmartThings App does not work since the remote control function is disabled for my Samsung POWERbot SR2AK9350W Vacuum Cleaner POWERbot?
If controlling with the SmartThings App doesn't work because the remote control function is disabled, enable the remote control function using a remote controller.
General| Model | SR2AK9350W |
|---|---|
| Dust Collection | Bagless |
| Color | White |
| Suction Power | 20W |
| Battery Life | 90 minutes |
| Charging Time | 240 minutes |
| Dustbin Capacity | 0.3 liters |
| Connectivity | Wi-Fi |
| Smart Features | Yes |
| Sensors | Obstacle Detection, Cliff Detection |
| Run Time | 90 minutes |
| App Control | Yes |
| Voice Control | Yes (Bixby, Alexa, Google Assistant) |
| Auto Recharge | Yes |
| Virtual Guard | Yes |
| Type | Robot |
| Battery Type | Lithium-ion |
| Cleaning Modes | Auto, Spot |
| Category | Robot Vacuum Cleaner |
Essential safety guidelines for operating the POWERbot and its accessories.
Information on polarized plugs, and specific warnings for use and maintenance.
Details regarding FCC, IC, and other regulatory compliance for the device.
Information regarding the open source software used in the product.
List of included accessories and important notes for docking station setup.
Details on automatic, manual recharging, and low battery charging.
How to select different cleaning modes and general operation.
Using boundary markers to restrict areas and activating energy-saving mode.
Explains the functions of the remote control for manual and spot cleaning.
Guide for cleaning the dustbin, sensors, brushes, and wheels.
Steps to download, set up the app, and connect the POWERbot to your smartphone.
Overview of app features like software updates, control, and area cleaning.
Information regarding battery care, sensor function, and potential issues.
Troubleshooting general operational problems and error codes.
Resolving issues with the SmartThings App, Wi-Fi, and connectivity.
Troubleshooting connection cuts and remote control function problems.
To Next Page