33
Using a touchscreen monitor (Supported model: QB24C-T)
Chapter 03
Touchscreen monitor
Control a PC by tapping the screen instead of using an input device such as a keyboard or
mouse. The touch screen functions by detecting a minute electric current that runs through
your body (capacitive). Make sure to use the surface of your finger tip when tapping the screen.
"
To control the touchscreen of a PC connected to the product, select SystemTouch Control
Device to ControlConnected Source Device or Auto from the OSD menu.
"
To use the touch control of the product, go to SystemTouch ControlDevice to Control
from the OSD menu using the remote control and select Samsung SMART Signage or Auto.
Read below before using the product
Take extra care to ensure an electrical substance does not contact the screen. The screen
may not function properly if there is static.
Do not press hard on the touchscreen with your finger tip. Do not use a sharp object when
tapping the screen. The screen may break or get damaged.
Do not tap the screen while wearing a glove, with a dirty finger, or using something sharp
such as your fingernail or a ballpoint pen. The screen may not function properly.
Take extra care to ensure the screen does not contact moisture. The touch sensor may not
function properly.
Displaying a still image on the screen for an extended period of time may cause after
images (screen degradation) or stains. Turn off the screen when not in use.
To Next Page
Loading...
Need help?
General
