90
2nd 3rd Description
Sound Output Select speakers for sound output.
"
When you set Sound Output to External or Receiver (HDMI), the internal speaker is turned off. You will hear sound through
the external speakers only.
"
The audio is available both for internal and external speakers while connected through the AUDIO OUT port with the Sound
Output option set to Internal. Connecting parts may differ in different products.
"
To select the Receiver (HDMI) option, set Anynet+ (HDMI-CEC) to On while the product is connected to the AV Receiver’s
HDMI(ARC) port.
"
If there is no video signal, both the products speakers and the external speakers will be mute.
"
This function may not be supported depending on the model.
Auto Volume Automatically adjusts the volume level when you change video sources or content so the level remains the same.
"
To use the volume control of a connected source device, set Auto Volume to Off.
"
This function is disabled when Sound Output is set to External or Receiver (HDMI).
"
This function may not be supported depending on the model.
Reset Sound Reset all sound settings to the factory defaults.
"
This function may not be supported depending on the model.
To Next Page
Loading...
Need help?
General
