Samsung SBB-CS4B - Page 31

31
Input source control
 Function
The input source of a product can be changed using a PC.
 Viewing input source state (Get Input Source Status)
Header Command
ID
Data length
Checksum
0xAA 0x14 0
 Setting the input source (Set Input Source)
Header Command
ID
Data length Data
Checksum
0xAA 0x14 1 "Input Source"
"Input Source": An input source code to be set on a product.
0x0C Input source At present, supports only reading the input source status.
0x21 HDMI1
0x23 HDMI2
0x25 DISPLAY PORT
0x60 MagicInfo
0x63 URL Launcher Operates only with URL Launcher.
0x65 Web Browser
"
This model does not support HDMI1 and HDMI2.
"
MagicInfo is only available with models that contain the MagicInfo function.
 Ack
Header Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 'A' 0x14
"Input
Source"
"Input Source": An input source code to be set on a product.
 Nak
Header Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 'N' 0x14 "ERR"
"ERR": A code showing what error has occurred.