65
Position
Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Screen Fit
or Custom.
―
To use the Position function after selecting Zoom1, Zoom2, Screen Fit or Custom, follow these
steps.
1
Press the d button to select Position. Press the E button.
2
Press the u or d button to move the picture up or down.
3
Press the E button.
Zoom/Position
Adjusts the picture zoom and position. This option is available when the input source is set to HDMI1,
HDMI2 (1080i/1080p), Component (1080i/1080p), AV. Picture Size must be set to Custom for the
option to be available.
1
Press the d button to select Zoom/Position. Press the E button.
2
Select the Zoom or Position. Press the E button.
3
Press the u/d/l/r button to move the picture.
4
Press the E button.
―
If you want to reset the picture to its original position, select Reset in the Zoom/Position screen.
―
The picture will be set to its default position.
HDMI Black Level
MENU m → Picture → HDMI Black Level → ENTER E
Selects the black level on the screen to adjust the screen depth.
•
Auto / Low / Normal
―
Available only in HDMI mode (AV Timing : 480p, 576p, 720p, 1080i, 1080p).
Reset Picture
MENU m → Picture → Reset Picture → ENTER E
Restore all picture settings to default.
To Next Page
Loading...
