74
Menu Transparency
Adjust transparency of menu box.
•
High / Medium / Low
High Contrast
Set the background and font to high-contrast colors in Menu. Menu transparencies become opaque
when the option is selected.
•
Off / On
Enlarge
Set whether to enlarge highlighted item in Menu.
•
Off / On
Setup
MENU m → System → Setup → ENTER E
Initial settings (Setup)
After powering on the product for the first time, configure basic settings such as the language, channel
and time.
Press the
button.
―
Enter your 4 digit PIN number. The default PIN number is “0-0-0-0".
If you want to change the PIN number, use the Change PIN function.
Time
MENU m → System → Time → ENTER E
You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off
at a specified time using the Timer function.
Clock Set
Select Clock Set. Select Date or Time, and then press E.
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right
arrow buttons to move from one entry field to the next. Press E when done.
―
Available only when Clock Mode is set to Manual.
―
You can set the Date and Time directly by pressing the number buttons on the remote control.
DST
Switches the DST (Daylight Saving Time) function on or off.
Off / Auto / Manual
•
Start Date: Set the start date of Daylight Saving Time.
•
End Date: Set the end date of Daylight Saving Time.
•
Time Offset: Select the correct time offset your timezone.
―
Start Date, End Date and Time Offset are enabled only when DST is set to Manual.
Sleep Timer
Automatically shuts off the product after a preset period of time.
(Off / 30 min. / 60 min. / 90 min. / 120 min. / 150 min. / 180 min.)
―
Use the up and down arrows to select a period of time, and then press E. To cancel Sleep Timer,
select Off.
To Next Page
Loading...
