17
ENGLISH
Getting to Know Your Camcorder
OSD (On Screen Display in DSC mode)
✤
These items are available on models SCD75/D77 only.
31. Folder number-file number
(see page 78
)
32. Message line
(see page 92
)
33. Photo mode (FRAME/FIELD)
(see page 79
)
34. Image counter
- Current still image/Total number of recordable still images.
35. CARD (memory) indicator
36. Image recording and loading indicator
(see page 76)
37. Image counter
- Current still image/Total number of recorded still images.
38. SLIDE SHOW indicator
(see page 81)
39. ERASE PROTECT
indicator (see page 82)
40.DPOF mark (see page 84)
41.USB (see page 71)
✤
When you set the power switch to CAMERA, the OSD is automatically turned on.
✤
When you set the power switch to PLAYER, the OSD is automatically turned off.
✤ Refer to page 48.
•
Turning OSD on/off
Press the ENTER (DISPLAY) button on the rear side panel.
- Each press of the button toggles the OSD function on and off.
- When you turn the OSD off,
In CAMERA mode: You only see those features being used.
In PLAYER mode: All OSD messages flash for 3 seconds then disappear.
•
Turning on/off the DATE/TIME
- The DATE/TIME is not affected when the OSD function is switched ON or OFF.
- To turn the DATE/TIME on or off, access the menu and change the DATE/TIME mode.
(see page 49 )
Turning the OSD on/off (All models)
OSD in DSC RECORD mode
OSD in DSC PLAYBACK mode
To Next Page
Loading...
