Samsung SCD77 - Rec Lamp; Wind Cut

ENGLISH
46
Advanced Recording
●
REC LAMP
✤ The REC LAMP function works in CAMERA mode only.
✤ You can turn the REC indicator on or off during recording.
1. Set the camcorder to CAMERA mode.
2. Press the MENU ON/OFF button.
■
The menu list will appear.
3. Turn the MENU DIAL to highlight REC LAMP.
4. To turn the REC lamp indicator ON or OFF during recording, press the ENTER button.
■
The REC LAMP menu is changed to ON or OFF respectively.
■
If you want to turn off the indicator, set the REC LAMP to OFF.
5. To exit, press the MENU ON/OFF button.
• WIND CUT
✤ The WIND CUT function works in CAMERA mode only.
✤ The WIND CUT function minimizes wind noise or other noise during recording.
- When the wind cut is on, some low sounds are cut out along with the sound of the wind.
■
The WIND CUT menu selecting method is the same as the REC LAMP.
(MENU) SP STBY
DSE SELECT...........OFF
W.BALANCE.............AUTO
SHUTTER.................AUTO
IRIS...........................AUTO
REC MODE..............SP
REC LAMP...............ON
: MENU
(MENU) SP STBY
DSE SELECT...........OFF
W.BALANCE.............AUTO
SHUTTER.................AUTO
IRIS...........................AUTO
REC MODE..............SP
REC LAMP...............OFF
: MENU