ENGLISH
70
IEEE 1394 Data Transfer
●
System requirements
■
CPU : faster Intel
®
Pentium III
TM
450Mhz compatible
■
Operating system : Windows
®
98SE, ME, Mac OS
■
Main memory : more than 64 MB RAM
■
IEEE1394 add-on card or built in IEEE1394 card
Recording with DV connecting cable
1. Set the power switch to PLAYER mode.
2. Connect the DV cable (not supplied) to the DV IN/OUT port of the camcorder and
to the DV IN/OUT port of the other DV device.
■
Make sure DV IN appears on the screen.
3. Press the START/STOP button to enter the REC PAUSE mode.
■
PAUSE is displayed in the OSD.
4. Start playback on the other DV device while you monitor the picture.
5. Press the START/STOP button to start recording.
■
If you want to pause recording for a while, press the START/STOP button again.
6. To stop recording, press the (STOP) button.
Note When making recordings on the camcorder, the picture on the LCD or a TV monitor may occasionally
be uneven. Recorded pictures are not affected.
To Next Page
Loading...
