57
ENGLISH
Advanced Recording
Audio dubbing
✤ The AUDIO DUBBING function only works in PLAYER Mode.
✤ You can add sound to the original sound on a pre-recorded tape, recorded in the SP mode with 12bit sound.
✤ Use the internal, or an external microphone.
✤ The original sound will not be erased.
Dubbing sound with microphone
1. Set the camcorder to PLAYER mode
■
If you want to use the external microphone, connect the microphone
to the external MIC input on the camcorder.
2. Press (PLAY/STILL) button and find the start position of the scene to be dubbed.
3. Press (PLAY/STILL) button to pause the scene.
4. Press the A.DUB button on the Remote Control.
■
A.DUB will be displayed in the LCD.
■
The camcorder is in a ready-to-dub state.
5. Press the (PLAY/STILL) button to start.
-
Press the
■
(STOP) button to stop the dubbing.
Note
■
You can not dub sound on a pre-recorded tape recorded in LP mode or 16 bit mode.
To Next Page
Loading...
