77
ENGLISH
Inserting and ejecting the SmartMediaCard (SCD77 only)
●
Inserting card
1. Turn the Power switch to OFF.
2. Insert the SmartMediaCard into the CARD slot located beneath
the camcorder in the direction of the arrow.
●
Ejecting card
1. Turn the Power switch to OFF.
2. Open the LCD monitor.
3. Slide down the Card Eject switch and pull out the card.
Notes
■
If you turn the power switch to PLAYER and set the mode switch to DSC, the last recorded image appears.
– If there are no recorded images on the SmartMediaCard, NO STORED IMAGE and MEM. will be blinking on the screen.
■
Do not turn off the power during recording, loading, erasing or formatting.
■
Please turn off the power when you insert or eject the SmartMediaCard or you could lose data.
■
Do not allow metal substances to contact terminals of the Card.
■
Do not bend the Card.
■
After pulling the card out from camcorder, please keep the SmartMediaCard in soft case to prevent static shock.
■
The memorized contents may be changed or lost due to misuse, static electricity, electric noise, trouble and repair.
Save important images separetely.
■
We are not responsible for data loss due to misuse.
Digital Still Camera mode (SCD75/D77 only)
D
S
C
To Next Page
Loading...
