Need help?Do you have a question about the Samsung SCP-2370RH and is the answer not in the manual?
General| PAL resolutions | 795 x 596 pixels |
|---|---|
| NTSC resolutions | 811 x 508 pixels |
| Maximum resolution | - pixels |
| Supported video modes | - |
| Pan range | 0 - 360 ° |
| White balance | ATW, Manual |
| Tilt angle range | -5 - 185 ° |
| Camera shutter type | Electronic |
| Minimum illumination | - lx |
| Sensor type | CCD |
| Optical sensor size | 1/4 \ |
| Digital zoom | 16 x |
| Optical zoom | 37 x |
| Focal length range | 3.5 - 129.5 mm |
| Form factor | Dome |
| Product color | Ivory |
| Housing material | Aluminum |
| International Protection (IP) code | IP66 |
| Type | IP security camera |
| RS-422 ports | 1 |
| Signal-to-Noise Ratio (SNR) | 52 dB |
| Ethernet LAN | No |
| AC input voltage | 24 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 15 W |
| Sustainability certificates | RoHS |
| Operating temperature (T-T) | -50 - 55 °C |
| Operating relative humidity (H-H) | 0 - 100 % |
Weight and Dimensions| Height | 399.5 mm |
|---|---|
| Weight | 6000 g |
| Diameter | 248 mm |
Describes optical zoom, protocols, auto security functions, digital flip, and day/night capabilities.
Lists main body, CD manual, user manual, hexagon screws, and L wrench.
Identifies external parts like safety wire holder and DIP switches.
Explains wiring board for alarm, communications, and power.
Illustrates RS-485/RS-422 connections to DVR.
Guides setting communication protocols and camera IDs using DIP switches.
Describes power adapter and recommended cables.
Step-by-step guide for attaching camera base and connecting wires.
Explains OSD symbols and how to navigate menus using the controller.
Covers Zoom/Focus, White Balance, Exposure, Back Light, AGC, SSNR, SSDR, Day & Night.
Details Presets, Swing, Group, Tour, PTZ Trace, Auto Run, Schedule, Power On Resume.
Includes Pan/Tilt Limits, Area Settings, Area Masking, Prop. P/T, Digital Flip, Image Holding, Jog Speed.
Configures OSD elements and alarm inputs/outputs.
Configures IR illuminator, sensor/timed modes, and camera resets.
Sets password protection and displays camera status.
Solutions for common camera problems.
Addresses issues like no picture, incorrect focus, and camera not starting.
Lists image device, resolution, illumination, and performance.
Provides physical dimensions with diagrams.
To Next Page
