Disassembly and Reassembly
3-8
Samsung Electronics
5. Pull the used drum cartridge out.
6. Remove the new drum cartridge from its bag.
7. Open the carefully pull the seal tape out of the
cartridge.
8. Thoroughly shake the drum cartridge side to side
9. Unpack the new drum cartridge and slide it into
place, making sure not to touch the surface of
the drum.
10. Slide the toner cartridge in until it locks in place.
11. Turn the cartridge locking lever toward the left
until you hear a ‘click’.
12. Close the front cover, then the side cover.
To Next Page
Loading...
