4.1.6.6 Network Setup
You may set up the network with the machine’s touch screen. Before doing that, you must have the
information concerning the type of network protocols and computer system you use. If you are not sure which
setting to use, contact your network administrator to congure this machine network.
For further explanation about network environment, refer to Network Printer User’s Guide within Network
Utilities CD.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter password and press OK.
3. Press the Setup tab > Network Setup.
Option Description
TCP/IP Protocol Select appropriate protocol and congure parameters to use the network
environment.
Apple Talk
Protocol
For Macintosh network environments, select this option. This option provides
packet transmission and routing functionality for networking.
Ethernet Speed Congure the network transmission speed.
To Next Page
Loading...
